Steel wire mesh (steel wire mesh) installation: The assembly of hot steel wire mesh can be fixed by welding steel wire mesh and assembly clip. When the individual assembly gap of the steel wire mesh is 10MM, each must pay attention to the stable and reliable assembly. lt; Hot steel wire mesh installation: The assembly of the hot steel wire mesh can be fixed by welding and assembly clips. When the individual assembly gap of the steel wire mesh is 10MM, each must pay attention to the stable and reliable assembly. Regular inspections should be carried out to prevent loosening of the assembly clips. It is best to weld or add rubber pads to the steel mesh near the vibration source.
If the equipment is everywhere,
1 Welding fixation is suitable for parts that need not be dismantled permanently. The indicators of stainless steel welded mesh include mesh size, wire warp, square meter steel content, galvanized amount, etc., mainly considering the corrosion resistance of steel wire mesh and the safety of the system! The use of assemble clips has the characteristics of not breaking and destroying the zinc layer and easy disassembly. The welding flow method is a steel wire mesh (steel wire mesh) on the first flat steel of each corner, the welding seam length is not less than 20mm and the height is not less than 3mm fillet welding. If the steel wire mesh or plate is directly welded to the supporting steel structure (engineering structure), then the welding place should be painted twice with zinc-rich silver powder paint to prevent rust.
It consists of upper card, lower card and M8 bolt (composition: head and screw). The galvanization of stainless steel wire mesh is more critical than the wire diameter. The amount of galvanization is very important. It must be hot plated. Welding first and then plating is better than plating and then welding. As for the wire diameter, comprehensive consideration is made on site construction and to meet the needs of safety, 0.6 ~ 0.7 As well. Each steel wire mesh uses at least four sets of mounting clips,
2 Fixing of mounting clip: The mounting clip is suitable for various series of steel wire mesh. Wire mesh is a general term for low carbon steel wire, medium carbon steel wire, high carbon steel wire, stainless steel wire and other materials woven or welded into a mesh material. The production processes are: ordinary braided type, embossed braided type and spot welding type. It is mainly made of steel wire and processed into mesh by professional equipment, so it is called steel wire mesh. It is better to install more plates on the available supports for the plates with larger spans. When ordering assembly clips, please state the examples, quantity and materials of the clips required.
