Precautions of stainless steel wire rope mesh in use
It is strictly prohibited to use the new stainless steel wire rope directly at high speed and heavy duty:
The new stainless steel wire rope should not be used directly under high speed and heavy load immediately, but should run for a period of time under low speed and medium load conditions, so that the new rope can adapt to the use state, and then gradually improve the running speed of the wire rope and increase the lifting load, that is, the new wire rope must go through the initial running-in stage before high-speed and heavy load operations.
It is strictly prohibited to use stainless steel wire rope network overload:
If the stainless steel wire rope is used in overload, it will rapidly increase the degree of extrusion deformation, the degree of wear between the internal steel wire and the external steel wire and the matching wheel groove, which will bring serious harm to the safety of the operation and shorten the service life of the pulley.
Stainless steel wire rope extrusion deformation is strictly prohibited:
Stainless steel wire rope can not be strongly squeezed when in use, so as not to deformation of the wire rope, resulting in structural damage and early wire break (when the wire surface will appear martensite this brittle layer of organization), broken strands and even broken ropes, significantly reducing the service life of the wire rope and endangering the safety of operation.
