1. Pocket rope binding method: Pass the sling through the bottom of the heavy object and hang the rope end on the hook. This method is mainly suitable for packing equipment or equipment with relatively regular shapes.
2. Rope binding method: Use the clasp to snap the sling into a rope loop, and then use the rope loop to bind the heavy object. When using the cable hoisting and binding, the binding rope is usually passed under the heavy object, and then the rope head and the middle section of the rope are connected with a clamp. The middle section of the rope can move freely in the snap ring. When the cable hoist is stressed, ,the rope loop has a tightening force on the heavy object at the binding point. When the weight reaches a vertical level, the binding rope will not slip on the surface of the heavy object.
3. Snap ring connection and bundling method: Use a snap ring to connect the rope head of the sling to the lifting rings and lifting lugs on the heavy object to bind the heavy object. This cable hoisting and binding method is often used for lifting lugs or lifting ring equipment and binding heavy objects. According to the number of lifting lugs or lifting rings on the heavy object, the corresponding number of snap points is used.
