nt@sw-steelwirerope.com    +86-513-83555312
Cont

Have any Questions?

+86-513-83555312

Apr 17, 2024

Why Wire Rope Should Be Lubricated?

Regardless of the structure and composition of the wire rope, the lubrication of the wire rope is a difficult problem. Wire ropes with fibre cores are easier to lubricate than those made entirely of steel. Therefore, careful consideration must be given to field re-lubrication when selecting wire rope for an application.

Wire rope lubricants have two main functions:

1. to reduce the friction of single wires moving against each other.

2. to provide corrosion protection and lubrication for the core, inner and outer surfaces of the wire rope.

There are two types of wire rope lubricants: penetrating and coating. Penetrating lubricant contains a petroleum solvent, which can bring the lubricant into the core of the wire rope, and then evaporate, leaving a thick film of lubricant to protect and lubricate each wire rope strand. Coated lubricants are less penetrating, but seal the outside of the rope against moisture and reduce abrasion and frictional corrosion caused by contact with external objects.
Both types of wire rope lubricants can be used. However, as most wire ropes fail from the inside, it is important to ensure that the centre rope core receives sufficient lubricant. A combination approach is recommended whereby a penetrating lubricant is applied to the core followed by a coating to seal and protect the outer surface. Wire rope lubricants can be petroleum jelly based, bitumen based, grease based, petroleum based or vegetable oil based.

QQ20240326095643

Send Inquiry